How To Make A Valance For A Window. So to get your inspiration started, here are 39 window valance ideas from custom workrooms, explained in detail. Select the fabric you want to use.
Start by measuring your window. Add hook & loop tape. Layout a piece of the mdf and draw a box the length and height of the cornice.
This Beautiful Valance Shared By Sasha Was Made From A Salvaged Wood Board With A Stenciled Design.
Mark the location of the studs on the wall. Fold the lining’s hem under and (removing and using the pin from the fabric) pin the two hems together. So to get your inspiration started, here are 39 window valance ideas from custom workrooms, explained in detail.
No Sew Box Style Window Valance.
The top edge of the box will be attached to the ledger board. 3 1/2 yards of 44” wide main fabric is needed to make my valance. Select the fabric you want to use.
Make Sure That The Valance Is Centered, With 2 Inches (5.08 Centimeters) Of Fabric To The Top And Bottom.
Brush some glue onto the top edge of the valance, right next to the batting. Do this on all 4 edges of the valance. Foam window valance is very delicate.
Buy A 2X4 For This Length.
I used heavy upholstery fabric i got for pennies on the dollar. Wrap the fabric around the top and bottom edges of the valance. Continue folding paper toward the back.
Wrap Excess Fabric To The Back Of The Boards And Snip Where Necessary.
Attach hook and loop tape (smooth side) to the front and ends of the 2×4. On the final fold, slice away slight angles of paper at the corners. 5.) iron the curtains before stapling them to the cornice box.