How To Measure For Carpet On Stairs And Landing

How To Measure For Carpet On Stairs And Landing. Stand on the staircase’s top step and measure the. Divide this number by 12 to get the measurement in feet.

Measuring Guide for Stair Runners Carpet Runners UK from carpetrunnersuk.co.uk

Note where the stairs enter the hall. Count how many stairs there are. This can be achieved by the use of a tape measure.

Multiply This Number By The Number Of Steps You Have To Cover.

Measure the height of the step riser (the height between the step below and the step above). Multiply the width of the landing by the depth to find its total area. The staircase carpet will flow from the landing to the rest of the stairs, making this starting measurement a crucial step.

Count How Many Stairs There Are.

To measure carpet for a landing, draw a quick sketch of the landing area on your paper so that you have somewhere to clearly write your measurements. To measure carpet for a landing, draw a quick sketch of the landing area on your paper so that you have somewhere to clearly write your measurements. When measuring straight stairs, measure from the back of the top riser (where it meets the previous step), over the nose (edge of the step) and down to the back of the next tread (where it meets the next step), then measure the width and jot both measurements down on your plan.

Ensure That You Note The Meeting Point Of The Stairs And The Hall.

Measurement #4 needs to go from the threshold of the door across the landing and over the nosing down onto the first step (see fig 2) stairs. When measuring a landing area for carpet, it’s important to note that measurements will need to include the top step of the stairs as well as the landing. Start your measure from the hallway.

Next, Measure The Width And Length Of The Room, Ensuring That You Go All The Way Into Doorways (So That The Carpet Meets The Carpet Of The Next Room) And Right Up To The Stairs.

To do this, we need to do one final calculation. Remember to measure into doorways and to the maximum points in the hall. Measure the riser the riser, or fall, of the step refers to the height or distance between one step and the next.

Measure The Width Of The Stairs With A Measuring Tape.

(see drawing), the same applies to the narrowest width. Calculate desired width & length of carpet roll. Multiply this number by the rise and run feet measurement to obtain the area in square.

Leave a Reply

Your email address will not be published.